Step by step
- Lay all the frames on the floor and play with the arrangement. Take a photo of the one you like.
- Trace each frame on kraft paper, cut it out, and mark on the paper where the hook or wire sits.
- Tape the templates to the wall. Put the largest (anchor) piece first, its center near 57 in from the floor.
- Fill around it, keeping the same 2 to 4 inch gap between frames.
- Step back, live with it a day, adjust.
- Nail through the marks on each template, tear the paper off, and hang the frames.
The template method is the one Homes & Antiques and Family Handyman use; one designer in Sunset hangs the four corners last, when they are easier to line up.
Different size frames, evenly
Even is about the gaps, not the frames. Keep every gap the same, line up either the outer edges or a center line, and mix orientations. For a calmer look, use one frame color.
Without nails
Picture-hanging strips work for light frames if you clean the wall first and respect the weight on the package. Heavy pieces still need a nail or an anchor.
Test sizes in the room
Neon Glow Draw lets you hang your photos in mid-air like a floating gallery and scale them from x1 to x15, and its wall preview shows a painting on the wall before you buy. Useful to decide which piece is the anchor. The wall preview in Neon Glow Draw shows the picture on your wall through the camera, so you can judge size and placement; the final drilling marks still come from a tape measure.