The painter's tape trick (two hooks)
- Put a strip of painter's tape across the back of the frame, over both hooks.
- Mark exactly where each hook sits on the tape.
- Peel the tape off and stick it on the wall where the picture should go.
- Check the tape with a level (or your iPhone) and adjust.
- Nail through the two marks, peel the tape, and hang the frame.
This is the method Hometalk and Black+Decker describe.
Without a level: use the iPhone
Open the Measure app, tap Level, and hold the iPhone against the top of the frame until it turns green. Apple notes the readings are approximate (Apple).
Keep it straight afterwards
- Two nails or hooks instead of one wire: the frame can't swing.
- Felt or rubber pads on the bottom corners stop tilting.
- Nail at a slight downward angle for more holding power, as several pros advise (Mental Floss).
- With strips: put them on the frame first, then press it to the wall while watching the level.
Check the position before the first nail
Neon Glow Draw has a wall preview that shows a painting on your wall through the camera before you hang it. The wall preview in Neon Glow Draw shows the picture on your wall through the camera, so you can judge size and placement; the final drilling marks still come from a tape measure.
Sources
- Hometalk: Hang a picture straight with one piece of tape
- Black+Decker: How to hang pictures
- Mental Floss: Expert tips for hanging a picture right the first time
- Apple: Use iPhone as a level (iPhone User Guide)
- App Store (France): Neon: Dessiner Lumière 3D, with trace mode and wall preview (read November 12, 2026)