Guide · Neon Glow Draw

Light painting camera settings

Quick answer

Good starting light painting camera settings are manual or Bulb mode, ISO 100, f/8 and a 30-second shutter, with the camera on a tripod and the focus set by hand. Then adjust one thing at a time. Neon Glow Draw, by Gambit Studio, skips settings entirely: it draws neon on iPhone video with augmented reality.

Updated 3 min readGambit Studio

The numbers above are the starting point Light Painting Brushes recommends (Light Painting Brushes). ExpertPhotography gives the same logic: manual mode, because automatic exposure "won't understand what you're trying to do", and a low ISO of about 100 to 200 for a clean image (ExpertPhotography).

The settings, one by one

SettingStart withWhy
ModeManual (M) or BulbBulb keeps the shutter open as long as you hold it, past the usual 30-second limit
Shutter speed30 secondsTime to draw; shorten it for a quick shape, use Bulb for a big scene
Aperturef/8Sharp enough front to back; close down (f/11, f/16) if the light looks too bright
ISO100 to 200Low noise, and it keeps a bright light from blowing out
FocusManualAutofocus can't lock in the dark; light the spot, focus, then switch to manual
ReleaseSelf-timer or remoteNo shake when you press the button, and you can walk into the frame

Shutter speed: how long should it be?

As long as it takes to draw, plus a second or two. Wikipedia notes that light painting exposures are usually at least one second (Wikipedia). Rough guide:

  • A heart, a spiral or a short word: 10 to 20 seconds.
  • A name or an orb: about 30 seconds (see how to make a light painting orb).
  • Steel wool: 5 to 20 seconds, at f/8 to f/16 (ExpertPhotography).
  • A car, a room or a landscape lit by hand: Bulb, for as long as the sweep takes.

Focusing in the dark

Shine a flashlight on the spot where you will paint, focus on it, then switch the lens to manual focus so it doesn't hunt during the shot. A red filter over the flashlight helps you keep your night vision (ExpertPhotography).

Read the test shot

Make the first frame a little dark: your light will add exposure to the final picture (ExpertPhotography). If the line is white and fat, close the aperture or move the light farther from the lens; if it is faint, open up or slow down your hand.

Shooting on a phone? The built-in Live Photo trick and long-exposure apps are covered in how to light paint on iPhone.

No settings at all: AR

Neon Glow Draw takes a different route: it is not a long-exposure camera and doesn't record real light. It draws virtual neon strokes in the camera view with augmented reality. You hold a finger on the screen and move the iPhone, the line appears in the air, and it stays anchored in the room while you walk around it and record a video.

Sources

  1. Light Painting Brushes: Equipment you need for light painting
  2. ExpertPhotography: Light painting photography tips
  3. Wikipedia: Light painting
  4. ExpertPhotography: Steel wool photography

Frequently asked questions

What people ask most about this, answered with the source.

What is the best shutter speed for light painting?
Start at 30 seconds. Use 10 to 20 seconds for a quick shape and Bulb mode when you need more than 30.
What ISO should I use for light painting?
ISO 100 to 200. A low ISO keeps the image clean and stops a bright light from overexposing.
What aperture is best for light painting?
f/8 is a good start. Close down to f/11 or f/16 if your lines look too bright or you need more depth of field.
Do I need Bulb mode for light painting?
Only for exposures longer than your camera's maximum, usually 30 seconds. Bulb keeps the shutter open while you hold the release.
Should I use autofocus for light painting?
No. Focus on the spot with a flashlight, then switch to manual so the camera doesn't hunt in the dark.
Neon Glow DrawAugmented Reality Art Camera
Get