Guide · Neon Glow Draw

How to make a light painting orb

Quick answer

To make a light painting orb, spin a light in a vertical circle with your arm straight while you slowly turn on the spot, keeping one foot planted so the sphere stays round. A 30-second exposure at f/8 and ISO 100 is a good start. Neon Glow Draw, by Gambit Studio, draws glowing neon rings in AR instead.

Updated 3 min readGambit Studio

Light Painting Brushes calls the orb "a fairly easy light painting technique"; the two things that matter are a straight arm and one foot that stays in the same spot while you rotate (Light Painting Brushes).

Step by step

  1. Put the camera on a tripod in the dark and set manual mode, ISO 100, f/8 and 30 seconds.
  2. Stand where the center of the orb should be and focus on that spot with a flashlight, then switch to manual focus.
  3. Hold the light at the end of your straight arm, or on a short string.
  4. Start the exposure and swing the light in a vertical circle beside you.
  5. While it spins, turn slowly in small, even steps, keeping one foot planted in the same spot.
  6. Stop after a full turn, turn the light off, and check the shape.

Why your orb isn't round

  • The foot moved. The sphere is centered on the planted foot; if it slides, the orb stretches.
  • The arm bent. A bent elbow changes the radius on every turn.
  • You turned unevenly. Small, equal steps give evenly spaced rings.
  • You appear in it. Wear black, non-reflective clothes (ExpertPhotography).

Variations

  • Half orb: stop after half a turn for a dome.
  • Glitter stick, Fabergé and exploding orbs: the same move with different brushes; Light Painting Brushes has a tutorial for each (tutorials).
  • Steel wool orb: spinning burning steel wool while turning. Real fire: read the steel wool safety rules first.

Neon rings in AR

Neon Glow Draw takes a different route: it is not a long-exposure camera and doesn't record real light. It draws virtual neon strokes in the camera view with augmented reality. You hold a finger on the screen and move the iPhone, the line appears in the air, and it stays anchored in the room while you walk around it and record a video. Draw a neon ring around yourself or a friend, and walk around it while you record.

Sources

  1. Light Painting Brushes: Orb light painting tutorial
  2. Light Painting Brushes: Equipment you need for light painting
  3. Light Painting Brushes: All tutorials
  4. ExpertPhotography: Light painting photography tips

Frequently asked questions

What people ask most about this, answered with the source.

How do you make a light orb in photography?
Spin a light in a circle with a straight arm while you turn slowly on one planted foot, during a long exposure of about 30 seconds.
What light is best for a light painting orb?
Any small light on a string or a short stick works. Glitter sticks, plexiglass and LED tubes give different textures.
Why is my light orb not round?
Usually the planted foot moved, the arm bent, or you turned in uneven steps.
What settings for light painting orbs?
Manual or Bulb mode, about 30 seconds, f/8 and ISO 100, with the camera on a tripod and focus set by hand.
Neon Glow DrawAugmented Reality Art Camera
Get