Fiber optic light pens have long been part of the light painter's kit; Wikipedia mentions tools like the Hosemaster (Wikipedia). Today they come as brushes that slide onto a flashlight through a rubber connector (Light Painting Brushes).
How to use it
- Slide the flashlight into the connector and attach the fiber optic brush to the other end.
- Put the camera on a tripod, set ISO 100, f/8 and 30 seconds, and focus by hand.
- Start the exposure and turn the light on with the fibers pointing at the camera.
- Sweep slowly in an arc; the slower the sweep, the brighter the strands.
- Twist your wrist during the sweep to make the strands fan out.
- Turn the light off before you move to the next stroke.
What to paint with fiber optics
- Wings behind a person, swept in two arcs.
- Ghosts: a slow vertical sweep gives a floating, see-through shape.
- A light necklace or halo around a subject.
- Silhouettes, with the fibers lighting the background.
Light Painting Brushes keeps tutorials for each of these, including ghosts, light necklaces and fiber optic portraits (tutorial library).
Settings
Start at manual mode, ISO 100, f/8 and 30 seconds (Light Painting Brushes). Fibers spread the light, so each strand is dim: if the result looks faint, slow your sweep before raising the ISO.
Fine strands in AR
Neon Glow Draw takes a different route: it is not a long-exposure camera and doesn't record real light. It draws virtual neon strokes in the camera view with augmented reality. You hold a finger on the screen and move the iPhone, the line appears in the air, and it stays anchored in the room while you walk around it and record a video. Its glitter trail and laser line brushes are the nearest to a fiber optic look, without the brush, the tripod or the dark room.