Step by step
- Choose an open outdoor spot, away from dry grass, and check that sparklers are legal there.
- Put the camera on a tripod and focus by hand on where you will stand.
- Set manual mode, ISO 100, f/8 to f/11 and an exposure of 10 to 30 seconds.
- Fill a bucket with water and keep it next to you.
- Start the exposure, light the sparkler and draw with it facing the camera.
- Drop the used sparkler into the water as soon as it goes out.
Writing a word? Each letter goes backwards from where you stand, so it reads right on camera: see light painting your name.
Settings
Start with manual mode, ISO 100, f/8 and 30 seconds (Light Painting Brushes), then shorten the exposure to match how long your sparkler burns. A sparkler is much brighter than a flashlight: if the lines come out white and thick, close the aperture to f/11 or f/16. Full table: light painting camera settings.
Safety, from the CPSC
- Sparklers burn at about 2,000 degrees Fahrenheit, hot enough to melt some metals.
- Emergency rooms treated an estimated 1,300 injuries involving sparklers in 2025.
- Never let young children play with or light fireworks, including sparklers.
- Keep a bucket of water or a garden hose nearby, and only use fireworks that are legal where you live.
Source: U.S. Consumer Product Safety Commission. ExpertPhotography also says candles and sparklers are fun "if you're careful" (ExpertPhotography).
Sparkle without fire
Neon Glow Draw takes a different route: it is not a long-exposure camera and doesn't record real light. It draws virtual neon strokes in the camera view with augmented reality. You hold a finger on the screen and move the iPhone, the line appears in the air, and it stays anchored in the room while you walk around it and record a video. Its glitter trail brush gives a sparkly line, indoors and with kids around, as a video. For the real sparks of a sparkler photo, you still need a long exposure.