Chamberlain used handheld lights to light or color parts of a scene selectively, and was the first artist to give his whole body of work to the form (Wikipedia).
Step by step
- Put the object on a table in a room you can make completely dark.
- Frame it with the camera on a tripod and focus by hand with the room lights on.
- Set manual mode, ISO 100, f/8 to f/11 and 20 to 30 seconds.
- Turn the lights off and start the exposure.
- Brush a small light over the object from the side and from behind, keeping it moving.
- Check the shot, then redo it changing only the angle or the time on each side.
Tips
- Use a small light. A penlight or a flashlight with a paper tube taped on gives a narrow beam you can aim.
- Light from the side and behind for shape and rim light; from the front, the object looks flat.
- Keep moving. A light that stops makes a hot spot.
- Build it in layers. Adding or removing light between exposures lets you blend several frames into one (Wikipedia).
- Underexpose the test shot: the painting adds light (ExpertPhotography).
Neon on the tabletop
Neon Glow Draw takes a different route: it is not a long-exposure camera and doesn't record real light. It draws virtual neon strokes in the camera view with augmented reality. You hold a finger on the screen and move the iPhone, the line appears in the air, and it stays anchored in the room while you walk around it and record a video. Write a word in 3D neon next to a cake, or hang a photo in mid-air above the table, and record it as video.